작동 장비

Increased Equipment Reliability

For decades, the predictable event after an unplanned plant shutdown was a long chain of rotary and instrumentation failures. Running from floor-to-floor bypassing pumps and valves a week after abrasive blasting had taken place was a common situation for maintenance crews in every industry all over the world.

Today the clean, dry, low-dust, ricochet-free technology offered by Sponge-Jet Sponge Media™ increases reliability of all plant equipment by eliminating the pulverized particles of dust common to all ordinary dry abrasive methods.

With Sponge-Jet, expect protection to:

  • Rotating equipment, shafts and bearings
  • Hydraulic and pneumatic cylinders
  • Electronics, switches, sensors and vision systems
  • Mechanical seals
  • Motors, engines, turbines and compressors
  • Heat transfer surfaces
  • Rails, guides, conveyors and transport systems

These fine, breathable, microscopic particles are not only toxic to humans but are a destructive enemy to all rotary, electronics and sensitive equipment.

Features & Benefits

  • Cost savings
  • Blasting on operating equipment
  • Extended time between repairs
  • Reliable schedule and budget
  • Protected integrity and reliability of assets
  • Increased asset life and coating performance

  • Machines Spaces while Underway

    Prior to the use of Sponge Media™ abrasive blasting, these difficult areas were maintained with power tools and constantly being repainted. The short life of power tool prepared coatings drove significant costs and a need for constant maintenance. Sponge-Jet now allows proper preparation and long-term coating life in these challenging machinery spaces.

  • Blasting on Live Process Equipment

    Pumps, valves and other process pipe components are all being prepared, while operating, at this Repsol fuel distribution plant. Normally the fugitive emission and dust would penetrate mechanical seals, bearings and other rotating items – causing future reliability issues. Now with Sponge-Jet, the plant maintains quality coating systems without compromise or fear of damaging sensitive equipment.

  • Refrigeration Pipes at Gas Plant

    These refrigeration pipes were blasted live, during operations at this liquid gas plant - saving time and protecting nearby equipment. By completing the coating work during normal operations, future shut downs became shorten and less complicated as fewer trades were required to work all at once.

  • Offshore Flare Lines Blasted in Operation

    Suspended over the ocean on an operating offshore platform this specialist is preparing the flare pipes for recoating by blasting with Sponge-Jet Silver 30 Sponge Media™ abrasives.

  • Blasting Flanges on Live Refinery Pipes

    Shown here is an operator preparing pipework including bolted flanges during production. Note, proper grounding to avoid static sparks is imperative in flammable environments.

  • Large Mechanical Gears and Wheels

    With caution and suitable containment Sponge Blasting can be conducted on large mechanical components while they are operating. Care must be taken to keep Sponge Media™ abrasives filtered from air intakes and mechanical movement where it could cause damage.

  • Motors Prepared while Running

    A major benefit using Sponge-Jet technology is the ability to blast and prepare operating motors. Not only does a proper coating prevent corrosion, a thin functional coating also helps with heat transfer and preventing motors from overheating and premature failure. The lack of abrasive dust using Sponge Media™ also protects the bearings from grit intrusion.

  • Brown Stock Wash Tank

    Pulp and paper mills utilize equipment covered with many intricate moving components. Fugitive emissions from ordinary abrasive blasting can rapidly destroy these components - especially bearings and seals. Sponge-Jet was used to prepare an intermittently used stock tank because all adjacent components would be protected - undamaged and could operate as required.

Sponge-Jet 리소스 센터

리소스

Sponge-Jet 리소스 센터

리소스

더 많은 리소스

블로그

Recent Blog Posts

  • Power Tooling vs Abrasive Blasting for Surface Prep

    Power tooling is a method of surface preparation commonly used in tight spaces where access is limited. Pneumatic, electric, and hand tools such as angle grinders, needle guns, wire wheels, wire brushes, scrapers, and sanding pads can be used to remove rust, paint, and other contaminants from a surface.

    더 읽기 >

  • Sponge Media and the Marine Industry

    Both Freshwater and Saltwater vessels see all sorts of contaminants and corrosion throughout their service life. Corrosion can threaten everything on ships, from power gen and water storage tanks, to their general structural integrity. In order to overcome these threats, proper surface preparation is key.

    더 읽기 >
더 많은 게시물